Cub Cadet Medium Frame 3 Stage - Manual (Page 110)

Medium Frame 2 & 3 Stage Snow Throwers
106
5. Slide the Cable Guide out from in between the
Cable Bracket and the Discharge Chute. See Figure
10.3.
6. Disconnect the cables from the Cable Guide.
7. Mark one of the cables and its location in the Cable
Bracket. See Figure 10.4.
8. Unhook the cable assembly from the Chute Deflec-
tor.
9. Remove both of the cables.
To install the Chute Deflector:
1. Hook the Cable Bracket onto the Chute Deflector.
2. Install both of the cables into the proper slots in the
Cable Bracket, as indicated by the arrows in Figure
10.5
NOTE: Forward movement of pitch control lever/
joystick should result in the Chute Deflector
moving down.
NOTE: If the cables are reversed, the chute opera-
tion will be reversed.
3. Insert the Cable Guide in between the Cable
Bracket and the chute.
Figure 10.3
Cable Guide
Cable Bracket
Figure 10.4
Mark the cable
and bracket
Figure 10.5