Cub Cadet Medium Frame 3 Stage User Manual
Page 124
Medium Frame 2 & 3 Stage Snow Throwers
120
5.
Slide the Cable Guide out from in between the
Cable Bracket and the Chute Deflector. See Figure
11.3.
6.
Disconnect the cables from the Cable Guide.
7.
Unhook the cable assembly from the Chute Deflec-
tor.
8.
Mark one of the cables and its location in the Cable
Bracket. See Figure 11.4.
9.
Remove both of the cables.
To install the Chute Deflector:
1.
Hook the Cable Bracket onto the Upper Discharge
Chute.
2.
Install both of the cables into the proper slots in the
Cable Bracket, as indicated by the arrows in Figure
11.5
NOTE: Forward movement of joystick should result
in the Chute Deflector moving down.
NOTE: If the cables are reversed, the chute opera-
tion will be reversed.
3.
Insert the Cable Guide in between the Cable
Bracket and the chute.
Figure 11.3
Cable Guide
Cable Bracket
Figure 11.4
Mark the cable
and bracket
Figure 11.5