Cub Cadet Medium Frame 3 Stage - Manual (Page 83)

Auger Housing and Gear Box
79
8. Remove the rear Input Shaft (long side) Seal.
9. Remove the snap ring. See Figure 7.34.
10. Remove the Input Shaft from the rear of the Gear
Box.
11. Lift the Worm Gear out of the Gear Box. See Figure
7.35.
12. Drive out the right side bearing.Figure 7.36.
13. Remove the seal.
Figure 7.34
Snap Ring
Figure 7.35
Worm Gear
Figure 7.36