Cisco OL-21636-01 - Manual (Page 184)

8-18
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
OL-21636-01
Chapter 8 Managing an L2VPN Service Request
Creating an L2VPN Service Request
Figure 8-25 PE for Attachment Circuit
This window displays the list of currently defined PEs.
a. From the Show PEs with drop-down list, you can display PEs by Customer Name, by Site, or by
Device Name.
b. You can use the Find button to either search for a specific PE, or to refresh the display.
c. You can set the Rows per page to 5, 10, 20, 30, 40, or All.
Step 7 In the Select column, choose a PE for the L2VPN link.
Step 8 Click Select.
The Attachment Tunnel Editor window appears. (See Figure 8-26 .)
Figure 8-26 PE Interface
Step 9 Choose a PE interface from the drop-down list.
Note ISC only displays the available interfaces for the service, based on the configuration of the underlying
interfaces, existing service requests that might be using the interface, and the customer associated with
the service request. You can click the Details button to display a pop-up window with information on
the available interfaces, such as interface name, customer name, VPN name and service request ID,
service request type, VLAN translation type, and VLAN ID information.