Cisco OL-21636-01 - Manual (Page 335)

A-57
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
OL-21636-01
Appendix A Sample Configlets
FlexUNI/EVC (ATM-Ethernet Interworking, Pseudowire Core Connectivity, End-to-End Circuit, no Bridge Domain)
FlexUNI/EVC (ATM-Ethernet Interworking, Pseudowire Core
Connectivity, End-to-End Circuit, no Bridge Domain)
Configuration • FlexUNI(EVC)/ATM-Ethernet Interworking.
• Feature: FlexUNI/EVC for ATM-Ethernet interworking with pseudowire core connectivity for
end-to-end circuit with multiple links. Bridge domain is disabled. One link is terminates on an ATM
interface on N-PE 1, and the other link terminates on an Ethernet interface on N-PE 2.
• Device configuration:
– The N-PE 1 is a Cisco 7600 with IOS 12.2(33) SRB3.
Interface(s): ATM1/0/0.370.
– The N-PE 2 is a Cisco ASR 9000 with IOS XR 3.9.0.
Interface(s): GigabitEthernet0/0/0/12.433.
Configlets
Comments • None.
•
N-PE 1 (ATM) N-PE 2 (Ethernet)
!
interface ATM1/0/0.370 point-to-point
no atm enable-ilmi-trap
pvc 0/370 l2transport
encapsulation aal5snap
xconnect 10.20.21.1 4531 pw-class
ISC-pw-tunnel-1 !
interface GigabitEthernet0/0/0/12.433
l2transport
encapsulation dot1q 433
rewrite ingress tag push dot1q 43
second-dot1q 53 symmetric
!
l2vpn
xconnect group ISC
p2p CISCO
interface GigabitEthernet0/0/0/12.433
neighbor 192.169.105.20 pw-id 4531
!
!
!
!