Ers (evpl) (point-to-point) – Cisco OL-21636-01 User Manual

Page 282

Advertising
background image

A-4

Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0

OL-21636-01

Appendix A Sample Configlets

ERS (EVPL) (Point-to-Point)

ERS (EVPL) (Point-to-Point)

Configuration

Service: L2VPN/Metro Ethernet.

Feature: ERS (EVPL) (point-to-point).

Device configuration:

The N-PE is a Cisco 7600 with IOS 12.2(18)SXF, Sup720-3BXL.

Interface(s): FA8/17.

The U-PE is a Cisco 3750ME with 12.2(25)EY1, no port security.

Interface(s): FA1/0/4 – FA1/0/23.

L2VPN point-to-point.

Configlets

Comments

The N-PE is a 7600 with an OSM or SIP-600 module.

The U-PE is a generic Metro Ethernet (ME) switch. Customer BPDUs are blocked by the PACL.

U-PE

N-PE

vlan 772

exit

!

interface FastEthernet1/0/23

switchport trunk allowed vlan 500,772

!

interface FastEthernet1/0/4

no cdp enable

no keepalive

no ip address

switchport trunk allowed vlan 500,772

spanning-tree bpdufilter enable

mac access-group ISC-FastEthernet1/0/4 in

!

mac access-list extended

ISC-FastEthernet1/0/4

deny any host 0100.0ccc.cccc

deny any host 0100.0ccc.cccd

deny any host 0100.0ccd.cdd0

deny any host 0180.c200.0000

permit any any

vlan 772

exit

!

interface FastEthernet8/17

switchport trunk allowed vlan

1,451,653,659,766-768,772,878

!

interface Vlan772

no ip address

description L2VPN ERS

xconnect 99.99.8.99 89027 encapsulation

mpls

no shutdown

Advertising