Cisco OL-21636-01 User Manual

Page 320

Advertising
background image

A-42

Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0

OL-21636-01

Appendix A Sample Configlets

FlexUNI/EVC (No AutoPick Service Instance Name, No Service Instance Name)

FlexUNI/EVC (No AutoPick Service Instance Name, No Service
Instance Name)

Configuration

•

FlexUNI(EVC)/Metro Ethernet.

•

Feature: FlexUNI/EVC with AutoPick Service Instance Name not enabled and the Service Instance
Name input field left blank.

•

Device configuration:

–

The N-PE is a Cisco 7600 with IOS 12.2(33) SRB3.

Interface(s): GigabitEthernet7/0/2.

–

The U-PE is a Cisco 3750ME with IOS 12.2(25) EY2.

Interface(s): FastEthernet1/0/14.

Configlets

Comments

•

In this example, the user does not enable AutoPick Service Instance Name and also leaves the
Service Instance Name input field blank.

•

The global command ethernet evc is not generated, while the command
service instance 43 ethernet is generated.

•

There is no Service Instance Name available and the Service Instance ID is 43.

U-PE

N-PE

!

vlan 566

exit

!

interface FastEthernet1/0/14

no spanning-tree bpdufilter enable

switchport

no keepalive

no ip address

switchport trunk encapsulation dot1q

switchport mode trunk

switchport trunk allowed vlan 566

switchport nonegotiate

no shutdown

mac access-group ISC-FastEthernet1/0/14 in

!

interface FastEthernet1/0/18

no ip address

switchport trunk allowed vlan 566

!

mac access-list extended

ISC-FastEthernet1/0/14

deny any host 0100.0ccc.cccc

deny any host 0100.0ccc.cccd

deny any host 0100.0ccd.cdd0

deny any host 0180.c200.0000

permit any any

!

interface GigabitEthernet7/0/2

service instance 43 ethernet

encapsulation dot1q 566

xconnect 1.1.1.1 453366 encapsulation mpls

Advertising