Cisco OL-21636-01 User Manual

Page 200

Advertising
background image

9-8

Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0

OL-21636-01

Chapter 9 Creating a VPLS Policy

Defining an MPLS/ERMS (EVP-LAN) Policy without a CE

Step 1

Click Next. The window in

Figure 9-7

appears.

The Editable check box gives you the option of making a field editable. If you check the Editable check
box, the service operator who is using this VPLS policy can modify the editable parameter during VPLS
service request creation.

Figure 9-7

MPLS/ERMS (EVP-LAN) without a CE Policy Attributes

Step 2

Choose an Interface Type from the drop-down list.

You can choose a particular interface on a N-PE, U-PE, or PE-AGG interface based on the service
provider’s POP design. The interfaces are:

ANY (Any interface can be chosen.)

Port-Channel (A bundle of ports that share the same characteristics—this gives the service provider
the ability to aggregate bandwidth and protection.)

Ethernet

FastEthernet

GE-WAN

GigabitEthernet

TenGigabitEthernet

TenGigE

The value defined here functions as a filter to restrict the interface types an operator can see during VPLS
service request creation. If defined as ANY, the operator can see all interface types.

Step 3

Check the Standard UNI Port check box to enable port security.

Advertising