Defining an ethernet/ems (ep-lan) policy with a ce – Cisco OL-21636-01 User Manual

Page 224

Advertising
background image

9-32

Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0

OL-21636-01

Chapter 9 Creating a VPLS Policy

Defining an Ethernet/EMS (EP-LAN) Policy with a CE

Defining an Ethernet/EMS (EP-LAN) Policy with a CE

This section describes defining a VPLS policy with an Ethernet core type and an EMS (EP-LAN) service
type with a CE present.

Figure 9-28

is an example of the first page of this policy.

Figure 9-28

Ethernet/EMS (EP-LAN) Policy with CE Present

Perform the following steps.

Step 1

Click Next.

The window in

Figure 9-29

appears.

The Editable check box gives you the option of making a field editable. If you check the Editable check
box, the service operator who is using this VPLS policy can modify the editable parameter during VPLS
service request creation.

Advertising