Cisco OL-21636-01 User Manual

Page 231

Advertising
background image

9-39

Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0

OL-21636-01

Chapter 9 Creating a VPLS Policy

Defining an Ethernet/EMS (EP-LAN) Policy without a CE

Figure 9-34

Ethernet/EMS (EP-LAN) without CE Policy Attributes

Step 2

Choose an Interface Type from the drop-down list.

You can choose a particular interface on a CE, N-PE, U-PE, or PE-AGG interface based on the service
provider’s POP design. The interfaces are:

ANY (Any interface can be chosen.)

Port-Channel (A bundle of ports that share the same characteristics—this gives the service provider
the ability to aggregate bandwidth and protection.)

Ethernet

FastEthernet

GE-WAN

GigabitEthernet

TenGigabitEthernet

TenGigE

The value defined here functions as a filter to restrict the interface types an operator can see during VPLS
service request creation. If defined as ANY, the operator can see all interface types.

Step 3

Check the Standard UNI Port check box to enable port security.

This is the default. When you uncheck the check box, the port is treated as an uplink with no security
features, and the window dynamically changes to eliminate items related to port security.

Step 4

Enter an Interface Format as the slot number/port number for the CE interface (for example, 1/0
indicates that the interface is located at slot 1, port 0).

Advertising