Vpls (multipoint, erms/evp-lan) – Cisco OL-21636-01 User Manual

Page 307

Advertising
background image

A-29

Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0

OL-21636-01

Appendix A Sample Configlets

VPLS (Multipoint, ERMS/EVP-LAN)

VPLS (Multipoint, ERMS/EVP-LAN)

Configuration

Service: L2VPN/Metro Ethernet.

Feature: VPLS (multipoint) ERMS (EVP-LAN).

Device configuration:

The N-PE is a Cisco 7600 with IOS 12.2(18)SXF, Sup720-3BX.L

Interface(s): FA2/18.

The U-PE is a Cisco 3750ME with IOS 12.2(25)EY1. No port security, no tunneling.

Interface(s): FA1/0/21 – FA1/0/23.

VPLS Multipoint VPN with VLAN 767.

Configlets

Comments

The N-PE is a 7600 with OSM or SIP-600 module.

The VFI contains all the N-PEs (neighbors) that this N-PE talks to.

The U-PE is a generic Metro Ethernet (ME) switch. The customer BPDUs are blocked by the PACL.
The VPLS ERMS (EVP-LAN) UNI is the same as the L2VPN (point-to-point) ERS (EVPL) UNI.

The SVI (interface 767) refers to the global VFI, which contains multiple peering N-PEs.

U-PE

N-PE

vlan 767

exit

!

interface FastEthernet1/0/21

no cdp enable

no keepalive

no ip address

switchport

switchport trunk encapsulation dot1q

switchport mode trunk

switchport trunk allowed vlan none

switchport trunk allowed vlan 767

switchport nonegotiate

spanning-tree bpdufilter enable

mac access-group ISC-FastEthernet1/0/21 in

!

interface FastEthernet1/0/23

no ip address

mac access-list extended

ISC-FastEthernet1/0/21

deny any host 0100.0ccc.cccc

deny any host 0100.0ccc.cccd

deny any host 0100.0ccd.cdd0

deny any host 0180.c200.0000

permit any any

l2 vfi vpls_ers_1-0 manual

vpn id 89017

neighbor 99.99.10.9 encapsulation mpls

neighbor 99.99.5.99 encapsulation mpls

!

vlan 767

exit

!

interface FastEthernet2/18

switchport trunk allowed vlan

350,351,430,630,767,780,783,785-791

!

interface Vlan767

no ip address

description VPLS ERS

xconnect vfi vpls_ers_1-0

no shutdown

Advertising