Freerider FR510GDX(D,Land Ranger XL8) User Manual

Page 12

Advertising
background image

22

23

Sign

Function

Specifications

On-Off Power switch

Will activate controller system
and control panel.

Batteries condition Indicator

Bars will illuminate to show the
level of charge in your batteries

Distance/ Temperature
/ Time indicator

Will illuminate when power On
and they also exhibit in different value.

1/2

Km/mile

Direction Indicator

Will illuminate when the director
switch is activated press to terminate

Will illuminate when the half
switch is activated

Switch between Centigrade and
Fahrenheit
1. Short press for switching between
Centigrade and Fahrenheit
2. Press sustained to get into program
setting mode P1, P1 is the diameter
of drive wheelsscope fr om 15cm~
100cm, a higher value will increase
speed value indicate.

Switch between Km and Miles
1. Short press for switching between
kilometer and mile
2. Press sustained to get into program
setting mode P2, P2 is the loadstone
(magnet) settingscope fr om 1~8
3. Press sustained to reset ODO
4. PressKm/Mile Resetto ge

t back

P1 mode

Status light

Half speed indicator

The green light will illuminate at
a constant rate when Key switch on
and will flash for identify faults

1

2

3

4

5

6

7

8

Sign

Function

Specifications

H

M

Hour setting
1. Short press to increase hours value
2. Press sustainedHto increas

e

hour value sustainability
3. Will return normal (drive) mode
after 3 sec. without setting

Minute setting
1. Short press to decrease minute
value
2. Press sustainedMto de

crease

minute value sustainability
3. Will return normal (drive) mode
after 3 sec. without setting.

Left and right horn button

Speed Adjustment Dial

Front/Rear light switch

Press to sound a warning to
other road users.

Allow to pre-select you
desired top speed.

Simply push on and off to
Front and rear light

10

11

12

13

14

R

Reset the distance(range)
1. Short press to switch between
ODO/TRIP
2. Press sustained to reset TRIP

9

Your controls are located on the handlebar console (

see

page 21

) they are:

1 On - Off Power Switch: Located on the right side

GDX is moving. Failure to observe this warning will

result in the motor brake being applied suddenly and

placing you in a dangerous situation.

You should only switch ‘off ’ when in motion in the case

of an emergency. Continual use in this mode may cause

undue stress to the drive system and damage the main

electronic speed control unit.

Be extremely cautious on slopes. Sit upright in your seat

or your machine could become less stable.

Sleep Time: When you rest your FR 510-GDX

Scooter with the electronics switched ‘on’ you are using

of your control console. Insert the key and turn

clockwise.

This controls the power to your speed control system.

You will note that after half a second the battery

condition gauge will illuminate with a solid light.

Your FR 510-GDX is now ready to drive. To switch

off your Scooter turn the key anti-clockwise. Remove

the key when your vehicle is left unattended.

Caution:

Do Not switch to ‘off ’ when your FR 510-

Advertising