A&D Weighing FX-3000i - Manual (Page 67)

65
FXi-15-EX Carrying case
You can carry the FZ-i / FX-i series balance by placing it in the carrying case.
AX-FXi-31 Main unit cover
Main unit protective cover provided as standard.
AD-1683 DC static eliminator
Used to minimize weighing errors due to static electricity on the material.
The AD-1683 is direct-current static eliminator. The ions generated
produce no breeze and are effective over a long distance. Therefore,
the balance can accurately weight powders, etc. by using the AD-1683.
AD-1684 Electrostatic field meter
This option measures the amount of the static charge on the sample,
tare or peripheral equipment and displays the result.
If those are found to be charged, discharge them using the AD-1683
DC static eliminator.
AD-1689 Tweezers for calibration weight
This option is used when calibrating the balance using an external weight.
AX-USB-9P-EX USB converter
Adds a COM port to a PC.
Enables bi-directional communication between the PC and the balance when a USB driver is
installed.
Can use serial communication software such as WinCT on a PC without COM ports.
AD-8920 Remote display
Connected to the FX-i series balance using the RS-232C serial interface to display the weight
data away from the balance.
AD-8922 Remote controller
Connected to the FX-i series balance using the RS-232C serial interface to display the weight
data and to remotely control the balance.
Analog output and comparator output available as an option to be installed.
AD-8121B Printer
Compact dot-matrix printer
Statistical function, clock and calendar function, interval
print function, graphic print function, dump print mode
5 x 7 dots, 16 characters per line
Print paper (AX-PP143, 45 (W) x 50 (L) mm , ø65 mm)
AC adapter or alkaline battery.