A&D Weighing EW-12Ki - Manual (Page 23)

21
Class Item
Param-
eter
Description
Š 0 7 bits, even parity
1 7 bits, odd parity
btpr
Data and parity
2 8 bits, non parity
0 ACAI disabled aCai
ACAI function
Š 1 ACAI enabled
If “0” is set,
no additional samples
required.
Š 0 1 d
1 1/8 d
Umin
Minimum unit
weight
2 total sample weight ≥5d ( * )
d = the minimum
display division
Š 0 10 pcs
1 25 pcs
2 50 pcs
3 100 pcs
smpl
Sample number
4 5 pcs
The number of
samples shown
first when entered
into the unit weight
storing mode
0 Always off
1 Turns off after 5 seconds
2 Turns off after 10 seconds
Š 3 Turns off after 30 seconds
4 Turns off after 60 seconds
func
ltUp
LCD Backlight
control
5 Always on
To control how the
LCD backlight
turns off. Weight
change or key
operation will turn
the backlight on.
CpHi Comparator upper limit Setting the upper limit value
Cplo Comparator lower limit Setting the lower limit value
See
“6. COMPARATOR”
Unit Weighing units to be displayed Sets to display units See “8-4. Storing
weighing units”
id ID number for GLP output Sets the ID number See “10. ID
NUMBER AND GLP”
Š Factory setting
( * ) Even if the weight display is “5d”, there may be a range that it is not accepted. This
is because the weight display data is rounded off internally.