A&D Weighing SE-150KAL - Manual (Page 9)

7
4-2. Switches
Switch Description
ON/OFF switch
Turns the power ON or OFF.
When turned ON, the scale will be automatically set to zero
(power-on zero).
PRINT switch
Outputs the weight value to the printer.
In the setting mode, this switch is used to increase the value of
the selected blinking digit by one.
UNITS switch
Switches the weighing unit.
In the setting mode, this switch is used to shift the blinking digit
to the right.
ZERO switch
Zeroes the scale and sets the display to zero.
TARE switch
Subtracts the tare (container) weight placed on the weighing
pan.
In the setting mode, this switch is used to store the setting value
and proceed to the next step.
‰
The ZERO and TARE switches work when the weight value is stable.
‰ The ZERO switch will zero the scale if the weight value is within ±2% of the
weighing capacity (kg) around the power-on zero point. The ZERO ◄ indicator
turns on. (ZERO operation)
‰ The TARE switch will tare the scale and subtract the weight to zero as a tare
weight when the weight is a plus value. In this case the ZERO ◄ and NET ◄
indicators turn on. (TARE operation)
When the tare is removed while the tare operation is in progress and the scale
returns to the zero point, the ZERO
◄ and NET ◄ indicators turn on. In this case
the displayed tare value will be negative.
‰ When the tare is removed while the tare operation is in progress and the ZERO
operation described above is performed, the tare operation previously done is
cleared and the NET
◄ indicator turns off.
ON/OFF