A&D Weighing AD-4407 - Manual (Page 54)

Page 52 AD-4407 Weighing Indicator
13.3.4. Commands for Hold Function
Start Averaging to Hold Start Averaging to Hold Start Averaging to Hold Start Averaging to Hold
Starts averaging to hold. The reply differs with the conditions.
Template HS
Command
Reply Averaging start
Averaging now
Hold
Release the Hold Data Release the Hold Data Release the Hold Data Release the Hold Data
Release the hold data or stop averaging and goes to the normal weighing mode.
Template HC
Command
Reply
Request Hold State Request Hold State Request Hold State Request Hold State
When receiving this command, returns the average/hold state immediately.
Template HD
Command
Reply Not hold nor averaging
Averaging now
Hold
13.3.5. Commands to Set Serial Data Output Format (UFC)
Set Serial Data Format Set Serial Data Format Set Serial Data Format Set Serial Data Format
Sets the serial output data format.
Format 1 (2) data is stored in the same memory area of f34 (f35).
Template SFf, [ parameters ]
f: Format number, 1 or 2
Command
Reply
13.3. Command Format
F S 1 $ , R G
S H
S H
D H 1 ,
D H 2 ,
D H
D H 1 ,
D H 2 ,
D H 0 ,
C H
C H
F S 1 $ , R G