Cisco XM Universal Gateways Cisco AS5400XM - Manual (Page 63)

A-9
Cisco AS5400XM Universal Gateway Chassis Installation Guide
OL-6418-02
Appendix A Replacing Memory Components
Replacing the Chassis Cover
Figure A-6 Inserting the New DIMM into the Socket
Step 9 Snap the latches into place. Do not use excessive force, because the socket might break.
Step 10 Replace the chassis cover. (See the “Replacing the Chassis Cover” section on page A-9 .)
Step 11 Power up the universal gateway. If error messages relating to memory are displayed, remove the DIMM
and reinstall it, taking care to seat the DIMM firmly in its socket.
Replacing the Chassis Cover
This section describes the procedure for replacing the chassis cover.
Required Tools and Equipment
• Medium Phillips screwdriver
• Four screws
• Cable ties
31627