Cisco XM Universal Gateways Cisco AS5400XM - Manual (Page 83)

B-17
Cisco AS5400XM Universal Gateway Chassis Installation Guide
OL-6418-02
Appendix B Replacing the Power Supply
Replacing the Chassis Cover
Figure B-18 Replacing the Redundant Power Supply Mounting Screws
Step 10 Replace the chassis cover, as described in the “Replacing the Chassis Cover” section on page B-17 .
Replacing the Chassis Cover
To replace the chassis cover, follow these steps:
Step 1 Place the chassis bottom so that the front panel is facing you.
Step 2 Hold the chassis cover over the chassis bottom, and align each of the cover tabs with the chassis tabs at
the top rear of the chassis. (See
Figure B-19 .)
14130
AC OK
DC OK
OTF
AC OK
DC OK
OTF
Mounting
screws
Power supply