GE JGBP27DEMWW - Manual (Page 10)

Using the dock and timer.
Throughout this manual, features and appearance may vary from your model.
You have the choice of having the timer show the time counting
down or the time of day. In either case, the timer will signal at the
end of the timer period to alert you that the time is up.
CLOCK
To Set the Clock
NOTE: when you first plug in the range or after
a power failure, the entire Clock/Timer display will
light up.
7] Press the CLOCK pad.
Press and hold the + or - pod and the time
^^ of day will change 10 minutes at a time. To
change the time by single minutes, give the
pods short tops.
~j\ Press the CLOCK pod to start the clock.
KITCHEN.
timer
I
yON/OFF y
To Set the Kitchen Timer
[7] Press the KITCHEN TIMER ON/OEE pod.
Use the + and - pods to set the timer. Short
tops on the + or - pad change the timer's
setting one minute at a time. Pressing and
continuing to hold the + pad increases the
setting 10 minutes at a time.
Once you hove set your timer, press the
KITCHEN TIMER ON/OEE pad to start
timing.
As the timer counts down, a signal will indicate
when one minute is left. After this signal, the
display will count down in seconds. When time
runs out, a final signal will sound. Press the
KITCHEN TIMER ON/OEE pad to stop the signal.
To Change or Cancel the Kitchen Timer Setting
when the timer is counting down, use the + and
- pad to change the remaining time, or press
the
KITCHEN TIMER ON/OEE pad to stop the
timer. The timer cannot be cancelled unless you
have fully completed "set timer" instructions
above.
10
Display Clock While Kitchen Timer Is Operating
Pressing the CLOCK pad while the timer is
operating will not interfere with the timer's
operation; the display will change to show the
clock, but the timer will continue to count down
and will still signal when time is up. Press the
KITCHEN TIMER ON/OEE pad again to change
the display back to show the timer.