Brother INTELLIFAX 900 - Manual (Page 21)

HOW TO USE 0№SCREEN PROGRAMMING (OSP) AND HELP KEY
Level one
function
Level two
function
Explanation of Options
■ Factory
setting
Page
1. SMOOTHING
Smoothing enhances the appearance of in­
coming faxes.
If you set SMOOTHING to ON, you can
receive messages with smoothing.
ON/OFF
ON 7-4
2. BEEPER
You can adjust the volume of the beeper
with this function.
OFF/LOW/HIGH
LOW 4-1-2
4. USER
OPTIONS 3. COVERPAGE
If you set COVERPAGE to ON, you can send
your documents with a Cover Page generated
by your machine. When the COVERPAGE
setting is ON, you can select a Cover Page
comment.
ON/OFF
OFF 6-16
4. GRAY SCALE
You can select a GRAY SCALE level.
16/32
32 6-13
5. PRINT
REDUCTION
You can set up the printing reduction.
OFF/93%/87%/73%/MANUAL
93% 7-6
6. PRINTER
ALARM
You can setup the printing alarm condition.
ONCE/3 TIMES/CONTINUE
ONCE 7-7
1. SET
TONE/PULSE
DIAL
There are two different dial types and you
must select the type of signal suitable for
your telephone.
TONE/PULSE
TONE 4-1
2. SET RING
DELAY
The number of rings that will occur before
F/T or AUTO Answer Mode selections are
activated.
0/1/2/3/4 rings
2 7-2
5, TELEPHONE
OPTIONS
3.AUT0 REDIAL
If you set AUTO REDIAL to ON, your ma­
chine will automatically re-dial the last
number called if the number was busy or the
call failed for some other reason.
ON/OFF
ON 6-5
4, SPEAKER
VOLUME
You can set the speaker volume.
OFF/LOW/HIGH
LOW 7-5
5. SET F/T
RING TIME
F/T RING TIME sets the time for simulated
ringing in F/T mode.
10/20/30/60 seconds
20 7-4
6. SET RING
VOLUME
You can set the ring volume.
OFF/LOW/HIGH
HIGH 7-5
3-2