Troubleshootiiiig char, Troubleshooting chart, Error message / information message – Sharp AX-1200 User Manual
Page 40: Troubleshooting chart -40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
T R O U B L E S H O O T I I I I G C H A R
If EE is displayed or you think the oven is not working properly, check the chart below before consulting a Sharp
Authorized Servicer. This will help to prevent unnecessary service calls.
ERROR MESSAGE / INFORMATION MESSAGE
MESSAGE ON DISPLAY
Due to technical error, call service for your nearest Sharp
Finish cooking by time.
The sensor does not detect vapor properly in microwave
sensor mode. Press
and finish cooking using
Oven is too warm to use.
The oven is too hot to use Microwave Defrost or Steam Proof.
Remove food from oven and allow to cool until the message
Water is frozen.
The oven may not operate properly.
Operate the oven with Convection Broil without food and
preheat for 5 minutes.
See page 29.
After cooking, the oven and the parts will be hot.
is shown in the display until the oven cavity
has cooled. The cooling fan may continue to operate up to
will disappear when the oven has cooled.
If you wish to use the warm oven, simply press
Replace drip tray.
Remove and replace the drip tray correctly.
See page 13.
In case the drip tray is not installed correctly.
will be shown in the display.
Empty drip tray and replace.
Empty drip tray and replace
will be shown in the display
when water remains in the drip tray. You must empty the drip
tray and replace it before SuperSteam Convection or Steam
Cooking will start. See page 13.
Descaling is necessary.
Follow step-by-step instructions for descaling.
See page 15.
Fill water reservoir.
Remove reservoir and fill with water to the 2 mark.
Replace and push firmly into place.
The oven cabinet and oven cavity are very hot.
Pay extra attention not to burn yourself.