Carrier 336 User Manual

Page 7

Advertising
background image

3

Models 336, 338 & 339

Safety

061031

Section 3

Safety

We at Taylor are concerned about the safety of the

operator when he or she comes in contact with the

freezer and its parts. Taylor has gone to extreme

efforts to design and manufacture built-in safety

features to protect both you and the service technician.

As an example, warning labels have been attached to

the freezer to further point out safety precautions to the

operator.

IMPORTANT -- Failure to adhere to the

following safety precautions may result in severe

personal injury or death. Failure to comply with

these warnings may damage the machine and its

components. Component damage will result in

part replacement expense and service repair

expense.

To Operate Safely:

DO NOT operate the freezer without reading

this operator’s manual. Failure to follow this instruction

may result in equipment damage, poor freezer

performance, health hazards, or personal injury.

S

DO NOT operate the freezer unless it is

properly grounded.

S

DO NOT attempt any repairs unless the

main power supply to the freezer has been

disconnected.

S

DO NOT operate the freezer with larger

fuses than specified on the freezer data

label.

Failure to follow these instructions may result in

electrocution or damage to the machine. Contact your

local authorized Taylor Distributor for service.

DO NOT use a water jet to clean or rinse the

freezer. Failure to follow this instruction may result in

serious electrical shock.

S

DO NOT allow untrained personnel to

operate this machine.

S

DO NOT operate the freezer unless all

service panels and access doors are

restrained with screws.

S

DO NOT remove the door, beater and

blades, or drive shaft unless all control

switches are in the OFF position.

S

DO NOT put objects or fingers in door

spout.

Failure to follow these instructions may result in

contaminated product or severe personal injury to

fingers or hands from hazardous moving parts.

USE EXTREME CAUTION when removing

the beater assembly. The scraper blades are very

sharp and may cause injury.

This freezer must be placed on a level

surface. Failure to comply may result in personal injury

or equipment damage.

DO NOT obstruct air intake and discharge openings:

3” (76 mm) minimum air space on sides and rear, and

7-1/2” (191 mm) on the bottom. The Model 338

requires 4-1/4” (108 mm) on the bottom.

Failure to follow this instruction may cause poor

freezer performance and damage to the machine.

These freezers are designed to operate indoors, under

normal

ambient

temperatures

of

70_--75_F

(21_--24_C). The freezers have successfully per-

formed in high ambient temperatures of 104_F (40_C)

at reduced capacities.

NOISE LEVEL: Airborne noise emission does not

exceed 78 dB(A) when measured at a distance of 1.0

meter from the surface of the machine and at a height

of 1.6 meters from the floor.

Advertising
This manual is related to the following products:

339, 338