Pitch shifter – KORG Soundlink DRS REcording Console 168RC User Manual
Page 64
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
15: Pitch Shifter
15: Pitch Shifter
This effect changes the pitch of the input signal. You can choose one of three types: fast response,
high sound quality, and a type mid-way between these. Since a delay with feedback is used, you
can also create special effects in which the pitch continues to rise (or fall).
MODE
Shift SEMI
Shift FINE
DIAY
FBAK
DAMP
Output PAN
Output LEVEL
Slow, Midi, Fast
Select the operating mode of the pitch shifter. Slow will
result in the least change to the sound quality. Fast will
provide quick response. Midi is between the other two
selections.
If only a small amount of pitch shift is required. Fast is an
appropriate setting. If you need to shift the pitch by a large
interval, you may wish to select
Slow.
-24...+24:l/2tene
Set the pitch shift amount in semitone steps.
-50...+50 cents
Set the pitch shift amount in 1-cent steps.
0...50 mS
Set the time by which the input signal is delayed.
-100...+100
Set the amount of feedback.
Since the sound that is fed back is re-input to the pitch
shifter, the pitch will successively rise (or fall).
0... 100%
Set the amount of high frequency attenuation.
L50...L01, CNT, R01...R50 Set the stereo location of the output.
0... 100
Set the output level.
57