Duplicate, Procedure for starting copy operation – KORG Soundlink DRS REcording Console 168RC User Manual
Page 85
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapters. MIDI
Duplicate
This setting allows operations on one 168RC to be exactly duplicated on another 168RC. This will
cause settings to be mirrored exactly, including all operations.
Specify the master and sender units as appropriate. System Exclusive messages will be used to
perform the same operations on the slave as on the master, including the LCD displays. When you
set the slave device, all panel input except for the MIDI mode System Extension parameters (-MIDI
Type) will be ignored.
Procedure for starting copy operation
O
Use a MIDI cable to connect the MIDI OUT of the master to the MIDI IN of the slave.
Q
On both the master and the slave, set the MIDI mode Devide ID to the same setting.
0 On the 168RC that will be the master, set MIDI mode System Extension to "Duplicate Master."
Leave this display page selected.
O On the 168RC that will be the duplicate slave, set MIDI mode System Extension to "Duplicate
Slave." Leave this display page selected.
When copy operation is started, the current settings of the receiving device will be modified,
so save those programs if necessary.
0
In the master display, select "Are You Sure? [YES]", and copy operation will begin. A certain
length of time is required for large amounts of data to be transmitted. The unit will not operate
until this Copy operation is completed.
When the operation is completed, select another mode and resume operations.
78