Document Outline

• MA-315-100
  • 1. Introduction
  • 2. Unpacking
  • 3. Precautions
    • Remarks on the Location
    • Remarks on Operating the ECR
  • 4. Table of Contents
  • 5. Outline of Preparation Procedure Before Operating the ECR
  • 6. Appearance and Nomenclature
  • 7. Control Lock and Control Keys
    • Control Keys
      • There are four types of Control Keys: the REG key, the MGR key, the MA key, and the S key.
    • Control Lock
      • The Control Lock has eight effective positions for different modes of operation, which are accessed by the appropriate Control Keys.
      • (position) (function)
  • 8. Display
    • Operator’s Display
  • PLU
  • DP RPT AMOUNT
    • Customer’s Display
    • Numeric Display
    • Message Descriptors (Triangular Lamps)
  • 9. Keyboard
  • 10. Installing the Receipt/Journal Roll
    • Installing the Receipt Roll
    • Installing the Journal Roll
  • 11. Installing the Ink Roll
  • 12. Setting the Time and Date
    • Setting the Time
      • Receipt Print Format
    • Setting the Date
      • The register has a calendar function. Once the date and time are correctly set, the day automatically advances at midnight even when the power is turned off. The extra day of a leap year is also computed automatically.
      • Setting Procedure
    • Displaying the Time
    • Printing the Time and Date
  • 13. Tax Table Setting
    • For details about the actual tax table, contact to the location where the register was purchased.
    • There are three ways to set state and local tax tables. Select one that suits the tax table required to be set.
    • Condition for Setting: After Daily Financial Reset
    • —► Go to 1), 2), or 3) on the following pages.
    • 1) Tax 1; Full Breaks (Non-cvclic Breaks + Cyclic Breaks)
    • 2) Tax 1; “A” Break and % Rate Combination (Non-cvclic Breaks + % Rate)
    • 3) Tax 1: % Rate Only
    • Setting Examples:
    • ex. 1) Tax 1; Full Breaks
    • ex. 2) Tax 1; “A” Break and % Rate Combination
    • Thank you Call again
      • ex. 3) Tax 1; % Rate Only
    • Thank you Call again
      • ex. 4) Tax 2; % Rate Only
    • Thank you Call again
      • Condition for Setting: After Daily Financial Reset
    • Thank you Call again
      • Condition for Setting:
      • Setting Procedure:
        • After Daily Financial Reset
    • Tax Calculation Test
      • Operating Procedure:
      • |Amount|
  • 14. Register No. Setting
    • When muitipfe registers are used in one store, or to distinguish this register from others used by other stores in the same chain, set the Register Number in the following procedure.
    • Setting Procedure:
      • #/NS
    • Thank you Call again
  • 15. Optional Key Setting
    • List of Keys
    • Key Installation Setting
      • Condition for Setting: After all Daily and Periodical Resets
      • Setting Procedure:
  • 16. Daily Operation Flow
  • 17. Cashier Identifying Operation
    • The MA-315 adopts one of the following cashier-identifying methods.
    • (1) Signing Method, using the [LOG/RECEIPT| key.
    • (2) Cashier Lock Method, using Cashier Locks (barrel locks)
    • (3) Cashier Push Key Method, using Cashier Keys (stay-down keys)
    • (2) Cashier Lock Method
      • Cashier Keys 1 to 4
    • 2.
    • (3) Cashier Push Key Method
  • 18. Setting Preparation of Each Key, and Transaction Entries
    • This chapter describes individual key operations on transaction entries, and setting requirements for the key if necessary.
    • Receipt-issue/Non-issue Selection (log/receipt Key)
      • "R OFF” (Receipt OFF) Lamp Status Change Operations
    • Clearing Errors, or Clearing Wrong Declaration Key or Wrong Numeric Entries
      • Item Correction (Last Line Voiding)
      • Void (Designated Line Voiding)
      • All Void (Transaction Cancel) Operations in “El” Mode
    • Department Keys
      • Programming Department Keys
      • Programming Department Status:
    • Thank you Call again
      • Programming Department LCs (Listing Capacities):
      • Setting Department Preset Prices;
      • Sale Item Entries Using Department Keys
      • Entry of One Item:
        • Open-price Department
      • Department Repeat Entry:
        • Open-price Department Repeat
        • Preset-price Department Repeat
      • Other Income Department:
      • Department Quantity Extension (Multiplication):
        • Open-price
        • Department
        • Preset-price
        • Department
        • (lo])[I][I][3l4]
      • Department SPP (Spllt-Package-Pricing):
        • Open-price Department
        • Preset-price Department
      • Single-item Department Entry:
    • Thank you Call again
    • Thank you Call again
    • PLU (Price-Look-Up)
      • Programming PLUs
      • Programming PLU Table:
      • Deleting Individual PLUs:
      • Sale Item Entries of PLUs
      • Entry of One PLU Item:
      • Preset-price PLU
      • Open-price PLU
      • PLU Repeat Entry;
        • Preset-price PLU
        • Open-price PLU
      • PLU Quantity Extension (Muitipiication):
        • Preset-price PLU
        • Open-price PLU
      • PLU SPP (Split-Package-Pricing):
        • Open-price PLU of SPP Type
        • Preset-price PLU of SPP Type
      • Single-Item PLU Entry;
    • Preset Price Open
    • Percent Charge, Percent Discount
      • Setting Preset Rate for % Keys
    • Thank you Call again
    • Thank you Call again
      • % Key Operations in Sale Entries
      • Percent Charge on a Department or PLU Item:
      • Percent Charge on Sale Total:
    • Dollar Discount
    • Vendor Coupon
    • Store Coupon
    • Tax Modification
    • item Correction (Last Line Voiding)
    • Returned Merchandise
    • Void (Designated Line Voiding)
    • All Void (Transaction Cancel)
    • Non-add Number Print
      • #/NS
      • #/NS
    • Subtotal Read & Print
    • Taxable Total Read
    • Manual Tax Entry
    • Food Stamp Tender
    • Cash Total, Cash Tender
    • Non-cash Media Total, Non-cash Media Tender
      • Chg
      • CPN
      • Finalizing a Sale as Charge;
      • Finalizing a Sale as Media-Coupon:
      • Finalizing a Sale as MIsc. (Miscellaneous Media):
    • Multi-tender, Split Tender
      • Mise
      • ST
      • AT/TL
      • ST
      • AT/TL
    • Tax Exemption
    • Check Cashing
      • Chg I CPN I
    • Thank you Call again
    • No-sale
      • #/NS I (
      • NS
    • Thank you Call again
      • Received-On-Account Payment R/A I (Received-on-Account Key)
      • R/A
    • Thank you Call again
      • Mise I NOTE 2
      • CUR4
      • Programming Foreign Currency Keys
      • Setting Foreign Currency Exchange Rate:
        • CUR1
        • CUR2
        • CUR3
        • CUR4
      • Setting Foreign Currency Amount Division Position (Display Form):
      • Entering Sale Paid In a Foreign Currency 1
        • ST
        • CUR1
        • CUR1
    • Post-issue Receipt
    • Thank you Call again
    • Thank you Call again
    • Validation Print
    • Print/Non-print Options on Sale Receipts
    • Thank you Call again
  • 19. Operations in “MGR” Mode
    • This chapter describes operations to be performed in the “MGR” position of the Control Lock, which the Store Manager can access using the MGR or MA key.
    • Keys and Manager Intervention Status
    • Operations and Manager Intervention Status
    • Listing Capacity Release
  • 20. Operations in “El” Mode
    • This chapter describes operations to be performed in the “S” position of the Control Lock, which the Store Owner or a person so authorized can access using the MA key.
    • Thank you Call again
    • Thank you Call again
  • 21. Read and Reset Reports
    • Programming Operations Reiating to Reports
      • Programming Hourly Range Table
      • Selecting PrInt/Non-prInt Items on Reports
    • Taking Read and Reset Reports
      • Fundamental Concepts of Various Types of Reports
      • Report Taking Operation
      • Daily Read Reports:
        • Daily Financial Read (X) Report
        • Daily Hourly Sales Read (X) Report
        • All PLU Sales Read (X) Report
        • Zone PLU Sales Read (X) Report
        • Media Sales and In-drawer Read (X) Report
        • B
        • Dally Reset Reports:
        • Daily Financial Reset (Z) Report
        • Daily Cashier Reset (Z) Report for signing Method
        • Daily Cashier Reset (Z) Report for Push Key Method Use MA Key.
        • Daily Hourly Sales Reset (Z) Report
• rnra-
  • All PLU Sales Reset (Z) Report
  • Zone PLU Sales Reset (Z) Report
  • Periodical Read Reports:
    • Periodical Financial Read (X) Report
    • Periodical All Cashier Read (X) Report
    • Periodical Reset Reports:
    • Periodical Financial Reset (Z) Report
    • Periodical All Cashier Reset (Z) Report
  • Report Sample Format
    • Financial Read or Reset Report fPallv or Perlodlcah
    • Cashier Read or Reset Report fPallv or Perlodlcah
  • Thank you Call again
  • Thank you Call again
  • 22. System Option Setting
    • Address; [T[
      • 6
    • Address:
      • I—I
    • Address:
    • Address: ^ ^
    • Address:
  • 23. Program Data Verification
    • Whenever programming operations are performed, it is recommended to issue Program Verification receipts to check the programmed data before entering any other operation.
    • Operating Procedure
      • REG W / B
      • Department Preset Price Read
      • Department LC and Status Read
      • Other Programmed Data Read
    • Thank you Call again
      • System Option Read 1
      • System Option Read 2
  • 24. Paper Roll Replacement and Other Maintenance
    • Replacing the Receipt Roll
    • Replacing the Journal Roll
    • Replacing the Ink Roll
    • Replenishing Ink to the Store Name Stamp
    • Manual Drawer Release and Lock
    • Removing the Drawer
  • 25. Troubleshooting
  • 26. Status Clear and Memory Clear Operations
    • The operations described in this chapter are provided for initial start-up of the machine or emergency but not to be operated as part of daily routines. Do not perform any of these operations unless it is really necessary.
    • Status Clear
      • Operating Procedure
    • Thank you Call again
    • Sales Memory Clear
      • Operating Procedure
    • Thank you Call again
    • All Memory Clear
      • Operating Procedure
    • Thank you Call again
  • 27. Specifications
    • STAMP ORDER