D.A.S. Audio DASnet V1.5 - Manual (Page 22)

When going on line the software will ask the user:
It is up to the user to decide if parameters on the software
file have to be sent to the devices (Send) OR settings from
the cabinets have to be imported to the software. In this
case we will use the settings from the units (Retrieve).
Immediately when pressing OK all the units on the
test1.dnd file will be On Line (without doing the scanning
process):
DASnet - 22
system´s name
The name of the system can be changed by the user. Once the change is done, the name will remain
the same even though a factory settings reset is done.
IMPORTANT: The first time the user connects the cabinets with the PC it is highly recommendable to
name all your inventory devices with numbers for instance.
IMPORTANT: The baud rate must remain at 57600 to ensure compatibility with all connected
devices.
IMPORTANT: The safest method of connection to avoid accidentally changing any device settings is
to select “Retrieve Settings from units” as this will upload all devices properties and parameters to
the computer.
IMPORTANT: Remember to save your system before closing DASnet to avoid having to rescan the
system every time you open the software. All window positions, zones, and screen layouts (so
positions of the Device View, Properties and System Monitor) are also saved.