D.A.S. Audio DASnet V1.5 - Manual (Page 28)

DASnet - 28
- Load monitoring: for each amplifier channel there is an impedance system control that
indicates if the speakers are working properlly(green) or not (red):
On the “advanced view” parameters as gain/delay/preset/polarity/mute and solo are available:
- Gain control: this control is for the complete cabinet (not per amplifier channel). From -20dB
to +6dB. Value can be entered using the keyboard or the gain control of the software.
- Delay control: this control is for the complete cabinet (not per amplifier channel). From 0ms
to 100ms.
advanced device view window
delay control
gain control
presets control
when a speaker is not
working the device
lits in yellow
- Polarity: inverts the polarity of the complete cabinet.
- Mute/Solo: per amplifier channel or per cabinet. When SOLO is activated ALL the other
devices on the net are muted.