D.A.S. Audio DASnet V1.5 - Manual (Page 61)

DASnet - 61
Appendix 1. Quick aero40A system configuration
When rigging for the first time the aero 40A, the most important thing is identifying the order in
which the cabinets have been flown to re-order them on the software.
For instance, let´s consider the DASnet identifying process for one side of the PA composed of
8 aero40A.
1 - We have taken notes and the order in which the cabinets have been flown is the following:
cabinet number 1 (top): DASnet ID 2864
cabinet number 2: DASnet ID 2399
cabinet number 3: DASnet ID 2115
cabinet number 4: DASnet ID 2429
cabinet number 5: DASnet ID 2874
cabinet number 6: DASnet ID 2323
cabinet number 7: DASnet ID 2626
cabinet number 8: DASnet ID 2605
2 - Second step is to do an “autoscan” on
DASnet. The software recognizes all the
connected devices (in this case 8
aero40A). BUT they don´t appear in the
physical order in which they have been
flown.
3 - Next step will be re-ordering and re-naming the cabinets accordingly to the physical order.
The cabinet 2864 is number one. The user
has to locate it on the software, changing
its name and moving it to the right position:
The aero 40A 2864 is aero 40A number
one regarding the physical rigging order.
We have to change its name and re
locate it on the software.