D.A.S. Audio DASnet V1.5 - Manual (Page 38)

basic window: device view
Impedance check control
Limiter monitoring
amplifier´s channel
temperature
system´s name
ID number
9.5 Cabinets - aero 20A
aero 20A basic window; DASnet ID 7237:
D.A.S. AUDIO S.A. (Valencia) MADE IN SPAIN
SIGNAL INPUT
IDENTIFY/COMMS
THROW
LOOP THRU
LONG
MID
SHORT
ON/PROTECT
SIGNAL/
LIMIT
NUMBER OF UNITS
16
8
4
2
12
6
3
1
20
CAUTION
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK DO NOT OPEN
N1918
IN OUT
DASnet - 38
- System´s name: defined by the user on the properties window.
- The ID knob allows the user to
identify the cabinet physically. The ID
LED on the amplifier will blink once per
second during a few seconds.
If communication is working the comms
LED will blink faster and permanently.
To identify the cabinet on the software the user
should press the button on amplifier´s panel; the
device window will blink on DASnet.
- Amplifier´s channel: for each amplifier channel there is a vumeter refered to the limiter
threshold. There is also a temperature vumeter that senses amplifier´s chanel temperature: