Canon EOS 7D - Manual (Page 120)

120
3 Setting the FlashN
[Built-in flash func. setting] and [External flash func. setting] Settable
Functions
* Regarding the [FEB] (Flash exposure bracketing) and [Zoom], refer to the
Speedlite’s instruction manual.
Flash mode
You can select the flash mode to suit your desired flash shooting.
[E-TTL II] is the standard mode of
EX-series Speedlites for automatic
flash shooting.
[Manual flash] is for advanced users
who want to set the [Flash output]
(1/1 to 1/128) themselves.
[MULTI flash] is for advanced users
who want to set the [Flash output],
[Frequency], and [Flash count]
themselves.
Regarding other flash modes, refer to
your Speedlite’s instruction manual.
Function
[Built-in flash
func. setting]
[External flash
func. setting]
Page
Flash mode k 120
Shutter sync. k 121
FEB* – k –
Flash exposure
compensation
k 117
E-TTL II k 121
Zoom* – k –
Wireless setting k 123
To prevent the flash from overheating and degrading, avoid firing the MULTI
flash more than 10 consecutive times. If you fire the flash 10 times, allow the
flash to rest for at least 10 min. before firing the flash again. Some EX-series
Speedlites will automatically stop firing after 10 times to protect the flash. If
this happens, let the flash rest for at least 15 min.