Canon EOS 7D - Manual (Page 156)

156
k Shooting Movies
Each time you press the <B> button, the information display will
change.
About the Information Display
Magnifying frame
AE lock
ISO speed
Shots remaining
Exposure compensation amount
Aperture
Shutter speed
Picture Style
Battery check
Exposure
simulation
White balance
Image-recording quality
AF point
(Quick mode)
AF mode
•d : Live mode
•c : Face detection Live
mode
•f: Quick mode
Movie-recording size
Movie shooting remaining
time/Elapsed time
Recording movie
Auto Lighting
Optimizer
Frame rate
Drive mode
You can display the electronic level by pressing the <B> button
(p.244). When you start shooting a movie, the electronic level will turn
off. To display the electronic level again, stop the movie shooting and
press the <B> button. Note that if the AF mode is set to [u Live
mode] or the camera is connected to a TV set with an HDMI cable
(p.185), the electronic level cannot be displayed.
If there is no card in the camera, the movie shooting remaining time will
be displayed in red.
When movie shooting starts, the movie shooting remaining time will
change to the elapsed time.
When < > is displayed in white, it indicates that the Live View image
brightness is close to what the actual movie will look like.