Canon EOS 7D - Manual (Page 63)

63
3 Setting the Image-recording Quality
If the current recording quality is JPEG only, you can press the <P>
button to also capture a RAW image (1 by default) at the same
time. If the current recording quality is RAW only, press the button to
also capture a JPEG image (73 by default).
This button will not work if the camera is already set (p.60) to
capture RAW and JPEG images at the same time.
1
Select [One-touch RAW+JPEG].
Under the [y] tab, select [One-
touch RAW+JPEG], then press
<0>.
2
Select RAW or JPEG.
Turn the <5> dial and select RAW or
JPEG, then press <0>.
3
Select the image-recording
quality.
Turn the <5> dial to select the image-
recording quality, then press <0>.
4
Take the picture.
Press the <P> button.
X The image-recording quality will blink
on the LCD panel. To cancel the
setting, press the <P> button again.
Press the shutter button completely to
take the picture.
X After the picture is taken, the setting
will be canceled.
One-touch RAW+JPEGN
This setting can also be combined with white balance bracketing and AEB shooting.
You can also cancel the setting by pressing the <Q>, <M>, <A>,
or <x> button or operating the Live View shooting/Movie shooting
switch or power switch.