Canon EOS 7D - Manual (Page 44)

44
Before You Start
4
Set the daylight saving time.
Set if necessary.
Turn the <5> dial to select [Y].
Press <0> so <r> is displayed.
Turn the <5> dial to select [Z], then
press <0>.
When the daylight saving time is set
to [Z], the time set in step 2 will
advance by 1 hour. If [Y] is set, the
daylight saving time will be canceled
and the time will go back by 1 hour.
5
Exit the setting.
Turn the <5> dial to select [OK],
then press <
0>.
X The Date/Time/Zone will be set and
the menu will reappear.
When Updating Firmware 1.x.x to 2.x.x:
When you update the firmware from version 1.x.x to 2.x.x, the “Date/Time”
will be reset. You will have to set the “Date/Time/Zone” again.
The menu setting procedure is explained on pages 40-41.
The date/time that was set will start from when you press < 0> in step 5.
In step 3, the time displayed on the upper right is the time difference
compared with UTC (Coordinated Universal Time). If you do not see your
time zone, set the time zone while referring to the difference with UTC.