Canon EOS 7D - Manual (Page 52)

52
1
Set the Mode Dial to <1>.
2
Aim the Area AF frame over the
target subject.
All the AF points will be used to focus,
and generally the closest object will
be focused.
Aiming the center of the Area AF
frame over the subject will make
focusing easier.
3
Focus the subject.
Press the shutter button halfway, and
the lens focusing ring will rotate to
focus.
X The AF point(s) which achieve(s)
focus will be displayed. At the same
time, the beeper will sound and the
focus confirmation light <o> in the
viewfinder will light.
X Under low-light conditions, the
viewfinder will flash in red to
illuminate the AF point.
X If necessary, the built-in flash will pop-
up automatically.
4
Take the picture.
Press the shutter button completely to
take the picture.
X The captured image will be displayed
for about 2 sec. on the LCD monitor.
If the built-in flash has popped up,
you can push it back down with your
fingers.
1 Fully Automatic Shooting
Area AF frame
Focus confirmation light