Canon EOS 7D - Manual (Page 162)

162
x Menu Function Settings
The built-in microphone records monaural
sound. Stereo sound recording is possible by
connecting an external stereo microphone
(commercially-available) equipped with a
miniature stereo plug (3.5 mm) to the
camera’s external microphone IN terminal
(p.16). When an external microphone is
connected, sound recording will switch
automatically to the external microphone.
[Auto] : The sound-recording level is adjusted automatically. Auto
level control will operate automatically in response to the
sound level.
[Manual] : For advanced users. You can adjust the sound recording
level to one of 64 levels. Select [Rec. level] and look at the
level meter while turning the <5> dial to adjust the sound-
recording level. While looking at the peak hold indicator
(approx. 3 sec.), adjust so that the level meter sometimes
lights up the “12” (-12 dB) mark on the right for the loudest
sounds. If it exceeds “0”, the sound will be distorted.
[Disable] : Sound will not be recorded.
This function applies when shooting still photos (p.141).
You can change how long the AE lock is to be maintained with the <A> button.
Sound recording
Silent shootingN
Metering timerN
When the shooting mode is set to <1> or <C>, the [Sound
recording] options will be [On/Off]. If [On] is set, the sound recording
level will be adjusted automatically (same as with [Auto]).
The sound volume balance between L (left) and R (right) cannot be adjusted.
Both L and R record audio at a 48 kHz/16-bit sampling rate.
Level meter