Safety belt reminders, Safety belt reminders -17 – GMC 2012 Sierra User Manual

Page 155

Advertising
background image

Black plate (17,1)

GMC Sierra Owner Manual - 2012 - CRC - 11/15/11

Instruments and Controls

5-17

When the engine is running, this
gauge shows the condition of the
charging system. The gauge can
transition from a higher to lower or a
lower to higher reading. This is
normal. If the vehicle is operating
outside the normal operating range,
the charging system light comes on.
See Charging System Light on
page 5‑22
for more information. The
voltmeter gauge may also read
lower when in fuel economy mode.
This is normal.

Readings outside the normal
operating range can also occur
when a large number of electrical
accessories are operating in the
vehicle and the engine is left idling
for an extended period. This
condition is normal since the
charging system is not able to
provide full power at engine idle.

As engine speeds are increased,
this condition should correct itself as
higher engine speeds allow the
charging system to create maximum
power.

The vehicle can only be driven for a
short time with the readings outside
the normal operating range. If the
vehicle must be driven, turn off all
accessories, such as the radio and
air conditioner.

Readings outside the normal
operating range indicate a possible
problem in the electrical system.
Have the vehicle serviced as soon
as possible.

Safety Belt Reminders

Driver Safety Belt Reminder
Light

There is a driver safety belt
reminder light on the instrument
panel cluster.

When the vehicle is started, this
light flashes and a chime may come
on to remind the driver to fasten
their safety belt. Then the light stays
on solid until the belt is buckled.
This cycle my continue several
times if the driver remains or
becomes unbuckled while the
vehicle is moving.

If the driver safety belt is buckled,
neither the light nor the chime
comes on.

Advertising