64 driving and operating – GMC 2012 Sierra User Manual

Page 340

Advertising
background image

Black plate (64,1)

GMC Sierra Owner Manual - 2012 - CRC - 11/15/11

9-64

Driving and Operating

The delay after shifting out of
R (Reverse) is approximately
10 seconds. The delay can be
canceled by performing one of the
following:

.

Pressing a hard key on the
navigation system.

.

Shifting into P (Park).

.

Reaching a vehicle speed of
8 km/h (5 mph).

Adjusting the Brightness and
Contrast of the Screen

To adjust the brightness and
contrast of the screen, press the
MENU button while the RVC image
is on the display. Any adjustments
made will only affect the RVC
screen.

]

(Brightness): Touch the + (plus)

or – (minus) screen buttons to
increase or decrease the brightness
of the screen.

_

(Contrast): Touch the + (plus)

or – (minus) screen buttons to
increase or decrease the contrast of
the screen.

Symbols

The navigation system may have a
feature that allows for viewing
parking assist symbols on the
navigation screen while using the
RVC. The Ultrasonic Rear Park
Assist (URPA) system must not be
disabled to use the caution symbols.
If URPA has been disabled and the
symbols have been turned on,
the Rear Parking Assist Symbols
Unavailable error message may
display. See Ultrasonic Parking
Assist on page 9‑61
.

The symbols appear near objects
detected by the URPA system. The
symbol may cover the object when
viewing the navigation screen.

To turn the symbols on or off:

1. Make sure that URPA has not

been disabled.

2. Shift into P (Park).

3. Press MENU to enter the

configure menu options. Turn
the Multifunction knob until the
Display feature is highlighted
and press the Multifunction
knob. Or press the Display
screen button

4. Select the Rear Camera Options

screen button. The Rear Camera
Options screen displays.

5. Touch the Symbols screen

button. The screen button will
be highlighted when on.

Guidelines

The RVC system has a guideline
overlay that can help the driver align
the vehicle when backing into a
parking spot.

If the vehicle has dual rear wheels,
this feature will not be available.

To turn the guidelines on or off:

1. Make sure that URPA has not

been disabled.

2. Shift into P (Park).

Advertising