Infotainment system 7-49 – GMC 2012 Sierra User Manual

Page 259

Advertising
background image

Black plate (49,1)

GMC Sierra Owner Manual - 2012 - CRC - 11/15/11

Infotainment System

7-49

When to Speak: A short tone
sounds after the system responds
indicating when it is waiting for a
voice command. Wait until the tone
and then speak.

How to Speak: Speak clearly in a
calm and natural voice.

Audio System

When using the in‐vehicle Bluetooth
system, sound comes through the
vehicle's front audio system
speakers and overrides the audio
system. Use the audio system
volume knob, during a call, to
change the volume level. The
adjusted volume level remains in
memory for later calls. To prevent
missed calls, a minimum volume
level is used if the volume is turned
down too low.

Bluetooth Controls

Use the buttons located on the
steering wheel to operate the
in‐vehicle Bluetooth system. See
Steering Wheel Controls on
page 5‑2
for more information.

b

/

g

(Push To Talk): Press to

answer incoming calls, confirm
system information, and start
speech recognition.

c

/

x

(End): Press to end a call,

reject a call, or cancel an operation.

Pairing

A Bluetooth enabled cell phone
must be paired to the Bluetooth
system and then connected to the
vehicle before it can be used. See
the cell phone manufacturer's user
guide for Bluetooth functions before
pairing the cell phone. If a Bluetooth
phone is not connected, calls will be
made using OnStar Hands‐Free
Calling, if equipped. See OnStar
Overview on page 14‑1
for more
information.

Pairing Information

.

A Bluetooth phone with MP3
capability cannot be paired to
the vehicle as a phone and an
MP3 player at the same time.

.

Up to five cell phones can be
paired to the Bluetooth system.

.

The pairing process is disabled
when the vehicle is moving.

.

Pairing only needs to be
completed once, unless the
pairing information on the cell
phone changes or the cell phone
is deleted from the system.

.

Only one paired cell phone can
be connected to the Bluetooth
system at a time.

.

If multiple paired cell phones are
within range of the system, the
system connects to the first
available paired cell phone in the
order that they were first paired
to the system. To connect to a
different paired phone, see
“Connecting to a Different
Phone” later in this section.

Advertising