Ride control system messages, Ride control system, Messages -44 – GMC 2012 Sierra User Manual

Page 182: 44 instruments and controls

Advertising
background image

Black plate (44,1)

GMC Sierra Owner Manual - 2012 - CRC - 11/15/11

5-44

Instruments and Controls

SERVICE PARK ASSIST

This message displays if there is a
problem with the Ultrasonic Rear
Parking Assist (URPA) system. Do
not use this system to help you
park. See Ultrasonic Parking Assist
on page 9‑61
for more information.
See your dealer for service.

Ride Control System
Messages

SERVICE STABILITRAK

If the vehicle has StabiliTrak and
this message displays, it means
there may be a problem with the
StabiliTrak system. If you see this
message, try to reset the system.
Stop; turn off the engine for at least
15 seconds; then start the engine
again. If this message still comes
on, it means there is a problem. You
should see your dealer for service.
The vehicle is safe to drive;
however, you do not have the
benefit of StabiliTrak, so reduce
your speed and drive accordingly.

SERVICE TRACTION
CONTROL

If the vehicle has StabiliTrak, this
message displays when there is a
problem with the Traction Control
System (TCS). When this message
displays, the system will not limit
wheel spin. Adjust your driving
accordingly. See your dealer for
service. See StabiliTrak

®

System on

page 9‑55 for more information.

STABILITRAK INITIALIZING

If the vehicle has StabiliTrak, this
message may come on if the
StabiliTrak system has not fully
initialized because of road
conditions or the incorrect tire size.
When the StabiliTrak system is fully
initialized, the message will turn
off. See StabiliTrak

®

System on

page 9‑55 for more information.
If this message continues to be
displayed for multiple ignition cycles
and on different road surfaces, see
your dealer for service.

TRACTION XX
STABILITRAK XX

This message displays when the
traction control and/or StabiliTrak
systems have been turned on or off.
Adjust your driving accordingly.
To limit wheel spin and realize
the full benefits of the stability
enhancement system, you should
normally leave StabiliTrak on.
However, you should turn
StabiliTrak off if the vehicle gets
stuck in sand, mud, ice, or snow
and you want to rock the vehicle
to attempt to free it, or if you are
driving in extreme off-road
conditions and require more wheel
spin. See If the Vehicle Is Stuck on
page 9‑15
.
To turn the StabiliTrak
system on or off, see StabiliTrak

®

System on page 9‑55.

Advertising