Seats and restraints 3-15 – GMC 2012 Sierra User Manual

Page 83

Advertising
background image

Black plate (15,1)

GMC Sierra Owner Manual - 2012 - CRC - 11/15/11

Seats and Restraints

3-15

Engaging the child restraint
locking feature may affect the
passenger sensing system,
if equipped. See Passenger
Sensing System on page 3‑32
for more information.

If the belt stops before it reaches
the buckle, when using the
lap-shoulder belt in a rear center
seating position of a crew-cab,
tilt the latch plate and keep
pulling the safety belt until it can
be buckled.

3. Push the latch plate into the

buckle until it clicks.

Pull up on the latch plate to
make sure it is secure. If the belt
is not long enough, see Safety
Belt Extender on page 3‑20
.

If the latch plate will not go fully
into the buckle, check if the
correct buckle is being used.

Position the release button on
the buckle so that the safety belt
could be quickly unbuckled if
necessary.

4. If equipped with a shoulder belt

height adjuster, move it to the
height that is right for you. See
“Shoulder Belt Height Adjuster”
later in this section.

5. To make the lap part tight, pull

up on the shoulder belt.

It may be necessary to pull
stitching on the safety belt
through the latch plate to fully
tighten the lap belt on smaller
occupants.

Advertising