Vehicle care 10-29 – GMC 2012 Sierra User Manual

Page 415

Advertising
background image

Black plate (29,1)

GMC Sierra Owner Manual - 2012 - CRC - 11/15/11

Vehicle Care

10-29

Checking Brake Fluid

Check brake fluid by looking at the
brake fluid reservoir. See Engine
Compartment Overview on
page 10‑6
.

The fluid level should be above
MIN. If it is not, have the brake
hydraulic system checked to see if
there is a leak.

After work is done on the brake
hydraulic system, make sure the
level is above the MIN but not over
the MAX mark.

What to Add

Use only new DOT 3 brake fluid
from a sealed container. See
Recommended Fluids and
Lubricants on page 11‑12
.

Always clean the brake fluid
reservoir cap and the area around
the cap before removing it. This
helps keep dirt from entering the
reservoir.

{

WARNING

With the wrong kind of fluid in
the brake hydraulic system, the
brakes might not work well. This
could cause a crash. Always use
the proper brake fluid.

Notice

.

Using the wrong fluid
can badly damage brake
hydraulic system parts. For
example, just a few drops of
mineral-based oil, such as
engine oil, in the brake
hydraulic system can
damage brake hydraulic
system parts so badly that
they will have to be replaced.
Do not let someone put in
the wrong kind of fluid.

.

If brake fluid is spilled on the
vehicle's painted surfaces,
the paint finish can be
damaged. Be careful not
to spill brake fluid on the
vehicle. If you do, wash it off
immediately.

Advertising