Fuel system messages, Key and lock messages, Lamp messages – GMC 2012 Sierra User Manual

Page 181: Object detection system messages, Messages -43

Advertising
background image

Black plate (43,1)

GMC Sierra Owner Manual - 2012 - CRC - 11/15/11

Instruments and Controls

5-43

be reduced the next time the vehicle
is driven. The vehicle may be driven
at a reduced speed while this
message is on, but acceleration and
speed may be reduced. Anytime
this message stays on, the vehicle
should be taken to your dealer for
service as soon as possible.

Fuel System Messages

FUEL LEVEL LOW

This message displays and a chime
may sound if the fuel level is low.
Refuel as soon as possible. See
Fuel Gauge on page 5‑14 and Fuel
on page 9‑68
for more information.

TIGHTEN GAS CAP

This message may display along
with the check engine light on the
instrument panel cluster if the
vehicle's fuel cap is not tightened
properly. See Malfunction Indicator
Lamp on page 5‑22
.
Reinstall the
fuel cap fully. See Filling the Tank
on page 9‑72
. The diagnostic
system can determine if the fuel cap

has been left off or improperly
installed. A loose or missing fuel
cap allows fuel to evaporate into the
atmosphere. A few driving trips with
the cap properly installed should
turn this light and message off.

Key and Lock Messages

REPLACE BATTERY IN
REMOTE KEY

This message displays if a Remote
Keyless Entry (RKE) transmitter
battery is low. The battery needs to
be replaced in the transmitter. See
“Battery Replacement” under
Remote Keyless Entry (RKE)
System Operation on page 2‑3
.

Lamp Messages

TURN SIGNAL ON

This message displays and a chime
sounds if a turn signal is left on for
1.2 km (0.75 mi). Move the turn
signal/multifunction lever to the off
position.

Object Detection System
Messages

PARK ASST BLOCKED SEE
OWNERS MANUAL

This message displays if there is
something interfering with the park
assist system. See Ultrasonic
Parking Assist on page 9‑61
for
more information.

PARK ASSIST OFF

After the vehicle has been started,
this message displays to remind the
driver that the URPA system has
been turned off. Press the set/reset
button or the trip odometer reset
stem to acknowledge this message
and clear it from the DIC display. To
turn the URPA system back on, see
Ultrasonic Parking Assist on
page 9‑61
.

Advertising