Golden Lighting 1260-15 RBZ-TEA - Manual

Assembly Instructions: 1260-11/13/15 (Multi-Family)
IMPORTANT:
• All InstAllAtIon work should be done by AccredIted proFessIonAl.
• shut oFF power supply At Fuse or cIrcuIt breAker!
• use only the specIFIed bulbs. do not exceed the MAxIMuM wAttAge!
PRePARINg fOR INsTAllATION
remove all of the contents from the carton including the yellow
bag that holds all of the parts. see the important notes above.
shut off the power at the circuit breaker and completely remove
the old fixture from the ceiling, including the old mounting strap.
Mounting strap (A) contains several pairs of threaded holes.
Find the pair of holes that matches the spacing of the holes
on the junction box. Place mounting strap (A) over the junction
box so that mounting screws (B) are pointing up with the head
of the screw at the bottom. secure mounting strap (A) to the
junction box with mounting screws and a screwdriver. Tighten
the screws securely.
CONNeCTINg The WIRes
Attach the power supply wires from the junction box to the
fixture’s wires. Connect black to black (or smooth); white to
white (or ribbed); ground to ground (green or copper). Twist the
ends of the wire pairs together, then twist on a wire connector.
Make sure all twists are in the same direction. If there is no
ground wire (green or copper) from the junction box, locate
ground screw on mounting strap (A) and wrap the fixture
ground wire around the green ground screw. use a screwdriver
to secure the ground screw onto the mounting bracket. tuck all
wires neatly into the junction box.
fINIshINg The INsTAllATION
raise ceiling pan (c) to the ceiling and position mounting
screws (b) through the openings of the keyhole slots. rotate
ceiling pan (c) so that the ceiling pan sits on the heads of
mounting screws (b) and tighten the screws with a screw
driver to secure ceiling pan (c) into place.
Install the light bulbs and glass shade by doing the following:
thread nipple (e) to ceiling pan coupler (d). Install light bulbs
in accordance with the fixture’s specifications. Do not exceed
the recommended wattage. slide glass shade (F) over
nipple (e) and slide nut (J) and bottom cap (h) over nipple
(E). Secure in place by screwing finial (I) onto the threads of
nipple (e).
your installation is now complete. turn on the power and test
the fixture.
CleANINg TIPs
Treat the fixture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down
the fixture with a clean lint-free cotton or microfiber cloth. Never spray cleaner directly onto the fixture.
For deep cleaning, turn off the light and remove the glass prior to cleaning. Hand wash glass with a damp cloth. Dry with a lint-free or
microfiber cloth.
BLACK
(Hot)
WHITE
(Neutral)
GREEN
(Ground)
HOUSE WIRES
SMOOTH
(Or Black)
FIXTURE WIRES
RIBBED
(Or White)
BARE COPPER
(Or Green)
for Customer service, contact the
place of purchase to arrange for
replacement parts.
H
I
J
F
B
A
C
D
E
G