Golden Lighting 1567-1W PC User Manual
Jh i l k, Parts & assembly sheet, Parts list
1567-1WPartsInstallation_20120313mRe.xls
Mounting Strap
1 ea
Ø
4"*1.5mm
Junction Box Screw
2 ea
#8-32N*H32mm
Mounting
Screw
2 ea
5/32"*H38mm
Wire
Connnector
3 ea
P3
Hex Nut
2 ea
5/32"*H3.5mm
Deco Nut
(Round)
2 ea
5/32"xH9mm
Green Ground
Screw
1 ea
#8-32N*H10mm
Part Needed
Quantity
Part Needed
Quantity
Reason why
( missing, scratched, broken glass, bent, bad finish)
Comments
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Fixture Name: Riverton 1567-1W PC
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing
or damaged, please note onthis sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
below to be filled out by retailer
1567-1W PC
Read and review installation instruction sheet before
assembling the fixture.
F
IXTURE
A
SSEMBLY
I
NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.
NOTE: I
NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
1. Place the fixture Back Plate ( K ), over the Mounting
Screws (B), so it protrude through the hole in the
Back Plate ( K ).
2. Thread the Deco Nuts ( J ) onto the Mounting Screws (B)
and continue turning until the Back Plate (K) is snug against
the wall .
3. Slide the Glass Shade ( H ) over Socket (I) and secure
Glass Shade (H) by threading the Socket Ring (J)
to Socket (I).
4. Install light bulb in accordance with the fixture's
specifications .
(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)
Fig. 4
J
H
I
L
K