Golden Lighting 1567-BA4 PC User Manual
Parts & assembly sheet, Parts list
1567-BA4PartsInstallation_20120502m.xls
Circular
Mounting Strap
1 ea Ø4"*1.5mm
Junction Box
Screw
2 ea
#8-32N*H32mm
Mounting
Screw
2 ea
5/32"*H38mm
Wire Connector
3 ea
P3
Hex Nut
2 ea
5/32"*H3.5mm
Deco Nut
(Round)
2 ea
5/32"xH9mm
Green Ground
Screw
1 ea
#8-32N*H10mm
Tube Finial
2 ea
3/8"xH37mm
Part Needed
Quantity
Part Needed
Quantity
Reason why
( missing, scratched, broken glass, bent, bad finish)
Comments
Read and review installation instruction sheet before
assembling the fixture.
F
IXTURE
A
SSEMBLY
I
NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.
1. Thread the Tube Finial to inside of Fixture
Tube (N).
2. Place the fixture Back Plate ( K ), over the
Mounting Screws (B), so it protrude through the
hole in the Back Plate (K).
2. Thread the Deco Nuts (L) onto the Mounting
Screws (B) and continue turning until the
Back Plate (K) is snug against the wall .
3. Slide the Glass Shade (H) over Socket (I)
and secure Glass Shade (H) by threading the
Socket Ring (J) onto Socket (I) until tight.
4.Install light bulb to Socket (I) in accordance
with the fixture's specifications .
(DO NOT EXCEED THE MAXIMUM WATTAGE
RATING!)
Fig. 4
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Fixture Name: Riverton 1567-BA4 PC
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing
or damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
below to be filled out by retailer
1567-BA4 PC
M
H
J
N
I
K L