Golden Lighting 1648-BA2 BUS - Manual

For Customer Service, contact the place of purchase to arrange for replacement parts.
1648-BA2 PARTS ASSEMBLY SHEET
PARTS & ASSEMBLY SHEET
This fixture assembled PO: Date:
Fixture Name: Olympia 1648-BA2 BUS
Notice: Please review the parts listing and check for all parts before assembling the fixture. If
any parts are missing or damaged, please note on this sheet and contact the place of
purchase to arrange for replacement parts.
PARTS LIST
Company Name:_____________ Co Account#:__________
below to be filled out by retailer
Mounting Strap
1ea 102X320mm
Green Screw
G8/32*H8 ㎜ 1ea
Mounting Screws
2ea
8/32"X5/8''mm
Wire Connectors
Orange 3ea
Mounting Screws
2ea 8/32X1"
Part Needed ______________________________ Quantity _________________________________
Part Needed ______________________________ Quantity _________________________________
Reason why (missing, scratched, broken glass, bent, bad finish)
Comments __________________________________________________________________________
FIXTURE ASSEMBLY INSTRUCTIONS
Read and review installation instruction sheet
before assembling the fixture
1. Place Glass Shade (K) over the socket to
sit onto the glass holder.
2. Insert Candle Sleeve (L) onto the socket
and gently thread the sleeve onto the
socket to hold Glass Shade (K) into place.
3. Install the bulbs as per the fixtures
specifications.
(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)
1648-BA2 BUS
Fig.1