Golden Lighting 1993-M1L PS - Manual

Canopy Wire Connectors Top Loop
1ea D150*H34mm 3ea A4 Orange 1ea
Chain
Junction Box
Screw
Spring Washer
1ea 6ft x3.8mm 2ea 8/32" x 1" 1ea @15 x 2mm
Chain Connector Nipple
2ea @4.2X50mm 1ea @3/8 x 40mm x 5mm 1ea @3/8 x 455mm
Mounting Strap
w/ ground screw
Hex Nut
1ea 3/4"X4" 2ea @3/8 x 3mm
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
PARTS & ASSEMBLY SHEET
Fixture Name: Joia 1993-M1L PS
This fixture assembled PO:__________ Date: ________
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
Canopy Loop
with Collar
F IXTURE A SSEMBLY I NSTRUCTIONS
Read and review installation instruction sheet before
assembling the fixture.
1993-M1L PS
Note: The wire cage and fabric shade are
already assembled on the fixture body
1. Thread the top loop (J) onto the nipple of fixture
body (M).Hand-tighten until snug.
Fig. 1
For Customer Service, contact the place of purchase to arrange for replacement parts.