Golden Lighting 2049-SF FB - Manual (Page 2)

PARTS & ASSEMBLY SHEET
Fixture Name: Valencia 2049-SF FB
For Customer Service, contact the place of purchase to arrange for replacement parts.
ASSEMBLING THE FIXTURE as semi-flush (Fig. 2)
2. Slide the Candle sleeves (O) on threaded socket.
3. Install the light bulbs in accordance with the fixture's
specifications.
4. Lower the fixture over the glass cage, use the round
Deco nuts (K) to secure arms (M) to the cage (N).
5. Then hang the Crystals (L).
Fig 2
Fig 3
ASSEMBLING THE FIXTURE as pendant (Fig. 3)
2. Slide the Candle sleeves (O) on threaded socket.
3. Install the light bulbs in accordance with the fixture's
specifications.
4. Remove Top Cap from fixture, then screw the Top
loop (J) to the center column until tight.
5. Lower the fixture over the glass cage, use the round
Deco nuts (K) to secure arms (M) to the cage (N).
6, Then hang the Crystals (K).
7. By measuring determine correct number of links
needed for proper hanging height. Use a pair of pliers
to open one link of the Chain then remove the excess
Chain and discard it.
8. Use one chain connector to attach one end of the
chain to the Top loop (J) and close the chain
connector.
9. Feed the fixture wires through the Chain (every three
links) and pull the wires until taut.
10. Slip Canopy loop collar over the chain, then do the
same with the canopy.
11. When ready to complete the installation Use the
other chain connector and attach the other end of the
chain to the canopy loop and close the chain
connector.
12. Make sure the weight of the chandelier is
supported by the chain-not the electrical wire.
*You may now hang the fixture
DO NOT EXCEED MAXIMUM WATTAGE RATING!
G
CHAIN
H
F
E
K
L
M
N
K
O
P
J
L
M
N
K
O
P