Golden Lighting 2073-1W GMT - Manual

For Customer Service, contact the place of purchase to arrange for replacement parts.
2073-1W GMT PARTS AND ASSEMBLY SHEET
PARTS & ASSEMBLY SHEET
This fixture assembled PO: Date:
Fixture Name: SMYTH 2073-1W GMT
Notice: Please review the Parts List and check for all parts before assembling the fixture. If any
parts are missing or damaged, please note on this sheet and contact the place of purchase
to arrange for replacement parts.
PARTS LIST
Company Name:_____________ Co Account#:__________
below to be filled out by retailer
Mounting Strap
Φ
102 ㎜ 1ea
Green Screw
G8/32*H8 ㎜ 1ea
Mounting Screws
H32 ㎜ 2ea H38 ㎜ 2ea
Wire Connectors
Orange 3ea
Hex Nut
G5/32*H4 ㎜ 2ea
Deco Nut
Φ
12 ㎜ 2ea
Tube
Φ
22*50mm 1ea
Part Needed ______________________________ Quantity _________________________________
Part Needed ______________________________ Quantity _________________________________
Reason why (missing, scratched, broken glass, bent, bad finish)
Comments __________________________________________________________________________
FIXTURE ASSEMBLY INSTRUCTIONS
Read and review installation instruction sheet
before assembling the fixture
2073-1W
Fig.1
1. Place Tube (B) over the Threaded Socket (A).
2. Hold Glass Shade(C) over Tube(B) and
Threaded socket(A)
3. Install the light bulbs in accordance with the
fixture's specification.
(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)
NOTE: INSTALL THE GLASS ASSEMBLY
AFTER FIXTURE IS HUNG
A
B
C