Golden Lighting 3711-ND3 CB - Manual

1ea ∅6-1/2"*H1-1/2" 2ea 8#32-IP*1" 1ea 1/8-IP*H60mm
1ea 6ft ∅3.8 3ea P3 Orange 1ea 1/4-IP*H60mm
2ea ∅5.8*H61mm 1ea ∅1-1/8"*H42mm 1ea W4-1/8"*E1"*H5mm
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
Chain connector
Canopy loop
with Collar
Mounting strap
ASSEMBLING THE FIXTURE (Fig.1)
1. Gently spread the arms until evenly spaced if arms are
packed closed
2. Align the arms over the arm connector screws (V) at top
of fixture center column and secure in place with the Deco
nuts (T) that were attached there.
3. Feed the fixture wires through the Top loop (J) and pull
the wires until taut.
4. Then screw the Top Loop (J) to the threaded center
column of Frame (M) until tight.
For Customer Service, contact the place of purchase to arrange for replacement parts.
1ea 1/8-27-IP*H32mm
Finial
F IXTURE A SSEMBLY I NSTRUCTIONS
Canopy Mounting Screws Top loop
Chain Wire connectors Nipple
PARTS & ASSEMBLY SHEET
Fixture Name : Rockefeller 2488-ND3 FI & 3711-ND3 CB
This fixture assembled PO:__________ Date: ________
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note onthis sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
Read and review installation instruction sheet before
assembling the fixture.
2488-ND3 FI & 3711-ND3 CB
Fig 1
NOTE: I NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
24883711-PartsInstallation_20110105m.xls